|Place of Origin:||Hejian,China|
|Minimum Order Quantity:||1 Set|
|Packaging Details:||Container loading with safety packing|
|Delivery Time:||70-150 Days after receive deposit|
|Payment Terms:||L/C, T/T|
|Supply Ability:||120 Set/Year|
China Maufacturer Direct Factory Wire Cable Making Planetary Stranding Machine
Cable Manufacturing Equipment:KS500/48+48 Steel Wire Armouring Machine
The machine is used for single-layer steel armoring or copper wire screening of cables, as well as twisting Al and copper wires, stranding control cables, rubber and insulated cables, also metal-taping function.
1. The main shaft is made of a seamless steel tube, supported by double-row roller on both ends.
2. The back-twisting is completed by planetary gears which are bevel gears subject to heat treatment and have good resistance to abrasion and continuous motions.
3. The dog pin for the bobbin has spring inside, easy for loading and unloading the bobbin.
|Single wire Dia. (mm)||Φ0.8-Φ1.2||Φ0.8-Φ2.0||Φ0.8-Φ3.5|
|Stranding Dia. (mm)||≤Φ10||≤Φ55||≤Φ100||≤Φ130|
|Cage rotation (rpm)||199.4||118||44||38|
|Stranding pitch (mm)||100-300||63-1067||88-1499||116-2019|
|Capstan wheel (mm)||Φ1000||Φ2000||Φ2500||Φ2500|
|Capstan linear speed (m/mim)||3-30||4.85-35.6||3.8-28.2||4.4-32.3|
|Main motor (KW)||22||45||55||75|
|Bobbin in the cage||PN315||PN400/PND400||PN400/PND400||PN500/PND500|
|Central pay off bobbin||PN630/PN1250||PN1250/PN2000||PN1600/PN2500||PN2500/PN4200|
|Take up bobbin||PN1000/PN1600||PN1600/PN2500||PN2000/PN3150||PN2500/PN4200|
4.2 48/400 main cage
4.2.1 The main cage gearbox is six-speed gearbox.use Hard tooth gear. left and right turn and space function.
4.2.2 The twisting cage is composed of a gearbox, a seamless hollow shaft, a winch, a wire rack, and an air brake device. Each section of the host is supported by a multi-section tugboat with a seamless hollow shaft, which has good rigidity and stable operation. After the winch, a new type of gear back-twist mechanism is installed. Through this mechanism, back-twist is achieved, which has the characteristics of small gear clearance and low failure rate..
The use of tension band to adjust the tension in the cage wire rack can make the tension of the core wire released on each cradle be stable and balanced; the top of the wire coil adopts the thread structure; the screw sleeve is equipped with a rolling bearing; the rolling bearing supports the top; the threaded sleeve stretches freely and is installed; With locking mechanism, the upper and lower thread plates are convenient and quick.
4.2.3 Each winch is connected with the main shaft through the flange plate. The main shaft is made of large-diameter seamless thick-walled steel pipe. The overall rigidity is good, the coaxiality of the winch is high, and the balance operation of the winch is high；
4.2.4 All wire nozzles are made of tungsten steel.
4.2.5 The main cage brake adopts plane air brake.
4.2.6 cage speed range 23.83～53.01r/min
4.2.7 armouring pitch 75.1～1262mm
4.2.8 cage inner pay off size DIN400
Contact Person: Max