June 25, 2024
SJ90 Rubber sheathed cable continuous vulcanization catenary line to Brazil
SJ90/16 Rubber sheathed cable continuous vulcanization catenary line
Technical parameters
SJ-90 extruded rubber sleeve continuous vulcanization unit is a special machine for cold feeding rubber sleeve extrusion molding, suitable for the production of insulation sheaths for rubber cables such as natural, styrene butadiene, green butadiene, nitrile, ethylene propylene, chlorinated polyethylene, chlorosulfonated polyethylene, silicone rubber, etc.
2. The main technical parameters
| 2.1 | Diameter before extruding | Φ5.0-Φ16mm |
| 2.2 | Diameter after extruding | Φ7.0-Φ30mm |
| 2.3 | Heating form | Steam |
| 2.4 | Cooling form | Water |
| 2.5 | Vulcanization Tube length | 42m |
| 2.6 | Tube specification | DN159*6 length of 24M, cooling tube 100*6 Length 18M |
| 2.7 | Tube material | Stainless steel seamless steel tube |
| 2.8 | Tube catenary angle | Inclined type 7.5° |
| 2.9 | Pay-off reel size | PN1000-PN2000 |
| 2.10 | Take-up reel size | PN1000-PN2000 |
| 2.11 | Upper belt wheel type capstan | Diameter of traction wheel Φ1200mm: traction force 1500kg |
| 2.12 | Front caterpillar max traction force | 1500kg |
| 2.14 | Production line speed | 50m/min |
| 2.15 | Power supply | Ground and neutral 3-phase 380V 60Hz |
| 2.16 | Compressed air | 8MPa |
| 2.17 | Cable max tension | 500kg |
| 2.18 | Cable movement direction | Right to Left |
Tel: +86-18606615951
Max Xu - China wire machinery expert
