Beyde Trading Co.,Ltd Company News

SJ90 Rubber sheathed cable continuous vulcanization catenary line to Brazil       SJ90/16 Rubber sheathed cable continuous vulcanization catenary line Technical parameters Use SJ-90 extruded rubber sleeve continuous vulcanization unit is a special machine for cold feeding rubber sleeve extrusion molding, suitable for the production of insulation sheaths for rubber cables such as natural, styrene butadiene, green butadiene, nitrile, ethylene propylene, chlorinated polyethylene, chlorosulfonated polyethylene, silicone rubber, etc. 2. The main technical parameters 2.1 Diameter before extruding Φ5.0-Φ16mm 2.2 Diameter after extruding Φ7.0-Φ30mm 2.3 Heating form Steam 2.4 Cooling form Water 2.5 Vulcanization Tube length 42m 2.6 Tube specification DN159*6 length of 24M, cooling tube 100*6 Length 18M 2.7 Tube material Stainless steel seamless steel tube 2.8 Tube catenary angle Inclined type 7.5° 2.9 Pay-off reel size PN1000-PN2000 2.10 Take-up reel size PN1000-PN2000 2.11 Upper belt wheel type capstan Diameter of traction wheel Φ1200mm: traction force 1500kg 2.12 Front caterpillar max traction force 1500kg 2.14 Production line speed 50m/min 2.15 Power supply Ground and neutral 3-phase 380V 60Hz 2.16 Compressed air 8MPa 2.17 Cable max tension 500kg 2.18 Cable movement direction Right to Left     Tel: +86-18606615951 Max Xu - China wire machinery expert

1. Equipment usage and advantage It is widely used for stranding Cooper, Aluminum, steel, control, telecom wire, small size plastic power wires and insulated core wires. It is also with tapping function. It uses PLC process control, touch screen, frequency controller and air control systems. The synchronization function deviation value is less than 3% when it launches, running, machine halt, scramming situations. This makes stranding pitch steady. The whole equipment operated by human-computer interface, colorful touch screen with advanced electrical system. 2. Specifications 3. Single wire diameter Cooper：φ1.5-5.0mm Aluminum：φ1.8-5.0mm Steel：φ0.9-3.6mm Al-clad steel：φ1.5-4.5mm Insulated wire：φ3.0-13mm 3.1. Max stranding diameter φ40mm 3.2. Stranding speed range 80r/min. 3.3. Motor power 45KW（AC） 3.4. Pay-off in cage PND630 3.5. Pay-off tension in cage Mechanical friction tension 3.6. Stranding Pitch 63-700mm（stepless regulation） 3.7. Max Linear speed 35m/min. 3.8. taped head max speed 600r/min 3.9. Taped head pitch 16-200mm（stepless regulation） 3.10. Taping machine power 2.2KW(AC) 3.11. Pay-off Bobbins range PND500/PND630 3.12. Capstan diameter φ1200mm 3.13. Capstan Motor power 22KW（AC） 3.14. Take up bobbin PN800-PN1600 3.15. Take up motor power 4.0KW（AC）   4. Components 4.1. Φ630 fixed pay-off loader 1set 4.2. 6 bobbins strander 1set 4.3. Wire Combined module 1set 4.4. Concentric type taping machine 1set 4.5. Self-adapting length counter 1set 4.6. φ1200 dual-wheel capstan device 1set 4.7. Φ1600 gantry type take-up loader 1set 4.8. Electrical control system 1set 4.9. Safety device 1set

Hebei Hexing Electrical Machinery Co., Ltd. is located in Hejian City, Hebei Province. It is an important manufacturer of specialized electrical machinery equipment and wire rope twisting equipment in the domestic industry. Since 1983, thanks to the rapid development of the social economy and the care and support of a large number of customers, Hexing Company has focused on research and development in the electrical and mechanical industry, and has obtained multiple national patent certifications. Continuously advancing and growing, it has played an important role in the research and development and manufacturing of wire and cable specialized equipment manufacturing industries both domestically and internationally, and has emerged in the steel wire rope twisting specialized equipment industry. Adhering to the business policy of "professional manufacturing, innovative research and development, and sincere service", we strive to become a first-class manufacturer of wire and cable specialized equipment at home and abroad, and a leading manufacturer of wire rope twisting specialized equipment. In the past forty years, with years of rich experience in serving the cable industry, Hexing Company has continuously innovated and upgraded its product lines, providing high-quality products, strong technical support, and comprehensive after-sales service to customers in more than 30 countries and regions including the United States, Russia, Brazil, India, Kazakhstan, South Korea, Vietnam, Thailand, and other countries and regions. It is a trustworthy partner for domestic and foreign customers  

BEYDE will participate in the Russian CABLEX cable exhibition from March 17 to 21, 2024. Max Xu will demonstrate the company's equipment during the exhibition. As China's leading cable equipment manufacturer, he will bring good prices and high-quality products.

Our latest cable forming machine 1250/1+1+3 has been sent to the Thai cable company, equipped with filling, metal and non-metal wrapping functions. this company bought from Max Xu +8618606615951 whatsapp

Warmly celebrate the purchase of the latest independent motor frame winch 630/12+18 by Brazil COPPERFIO. The machine has been completed in June 2021. After 40 days of transportation and 20 days of installation, the machine has been running normally.

    Tanzania purchaseed 5 sets of bow type laying-up machine   In 2018, Tanzanian customers came to the Shanghai Exhibition. We had our first contact. After three months of negotiation, the customer purchased a bow stranding machine. In 2022, the first machine was used very well. The customer was responsible for the overhead cable project of the Tanzanian government, and another 5 bow type laying up machine were added. Due to the epidemic, customers can't come to the factory. At the same time, customers trust us very much. During the first factory inspection, customers very much recognize our own processing capacity.

  1. Overview 1.1 Equipment purpose CPD2500 winch crawler traction type cabling machine is mainly used for the stranding and cabling of large section and long power cables. The pre twisted or non pre twisted cable cores can be twisted into cables respectively. Steel wire armouring is also available. 1.2 Equipment composition and description This machine is mainly composed of Ф 1600 rotary paying off stand (4 sets) Ф 2500 rotary paying off rack (1 set), filling rope paying off rack, conductor support, three row wire mold base, 42 coil wire paying off rack (2 sets), 84 wire pretorque devices, rotary wire mold base Φ 600 double winding device (1 set) Φ 800 steel belt armor device (1 set), 5T rotating crawler traction device Ф 2500 rotary winding frame, electric drive and control system, pneumatic hydraulic system, etc. The machine adopts the programmable controller to command and coordinate the starting, running and synchronous rotation of the whole machine and the motors of each branch. The AC motor of each branch is controlled by the imported frequency converter. The touch screen is used to display and adjust the operation status and process parameters of the production line. The electric control system is advanced in technology, convenient in operation and reliable in operation. The rotary crawler traction device and the rotary take-up stand of the machine are mechanically linked and rotate synchronously. The traction wire speed is controlled by a separate motor, and the pitch is stepless. The wrapping device is driven by a separate motor, and the wrapping pitch is stepless adjustable. The paying off rack is driven and rotated by a separate motor, which can rotate synchronously with the rotating take-up rack or jog independently. The take-up frame adopts the supporting wheel structure, which increases the rigidity, stability and reliability of operation. The machine is equipped with multiple safety protection and fault automatic shutdown devices, which are easy to operate, safe and reliable. 2. Basic technical specifications of equipment 2.1 Maximum outer diameter of cabling Ф 100mm 2.2 The maximum speed of the winch and pay off stand is 40r/min 2.3 Maximum traction linear speed 50m/min (stepless adjustable) 2.4 Cabling pitch 200 ～ 8000mm 2.5 Maximum traction force 5 tons 2.6 Maximum speed of non-metallic wrapping 650rpm 2.7 Specification of filling rope (outer diameter X hole diameter X width X quantity) Ф 400X Ф 22X360X10 Ф 800X Ф 52X320X4 2.8 Specification X quantity ¢ 500X ¢ 125X375X84 of steel wire armored wire reel 2.9 Main motor N=45KW (AC) n=1500rpm 2.10 Central rotary paying off frame motor (1 set): N=22KW (AC) n=1500rpm 2.11 Side pay off frame rotating motor (4 sets): N=15KW (AC) n=1500rpm 2.12 Traction motor: N=22KW (AC) n=1500rpm 2.13 Non metal wound motor: N=11KW (AC) n=1000rpm 2.14 Steel belt armouring machine: N=22KW (AC) n=1500rpm 2.15 Flat wire motor: N=2.2KW n=1500rpm 2.16 Wire take-up motor: N=5.5KW (AC) n=1480rpm 2.17 Specification of central pay off reel: PN2500 2.18 Specification of side pay off reel: PN1600 2.19 Specification of take-up reel: PN2500 3. Structure description and technical parameters of main components three point one Ф 1600 rotary paying off stand 3.1.1 Structure description The structure of this part is fork cantilever type. The utility model is composed of a driving motor, a reducer, a pneumatic brake device, a fork frame, a coil clamping mechanism, a horizontal pin, a tension control mechanism, etc. The pay off stand uses AC variable frequency motor to drive the fork stand to rotate independently, and the AC variable frequency motor drives the fork stand to rotate after decelerating through helical gear reducer, gear, etc. The paying off rack can rotate synchronously with the take-up rack; It can be fixed without rotation; The inching rotation can also be controlled manually. The paying off tension of 1600 rotary pay off rack is pneumatically controlled. Compressed air is sent to the rotary fork rack by a rotary pneumatic connector, and then acted on the tension disc by two tension controllers. The paying off tension can be adjusted at will on the pneumatic control cabinet under shutdown and running conditions. Note: The rotary pneumatic joint at the end of the spindle should be lubricated frequently during use, otherwise the sealing elements in the joint will be damaged. The clamping of the pay off reel is electrically controlled. The motor drives the center forward and backward through the belt transmission pair, worm gear and worm pair, nut screw pair, etc., so as to clamp or loosen the wire reel. The paying off rack is equipped with a horizontal pin, which is composed of a pin, two travel switches, etc. It is one When the fork is in the horizontal position, the pin installed on the base can be inserted into the round hole at the end of the fork. One travel switch acts. At this time, the reel clamping mechanism and the hydraulic lifting table can work. It is used to complete the clamping, loosening and up and down work of the reel. At the same time, the host cannot be started due to interlocking. When the latch returns, the other travel switch acts. At this time, the host can be started to run and the reel clamping mechanism is locked.

  Application:This machine is mainly used to copper wire shielding.   Overview of equipment composition The equipment is composed of PLC program control+touch screen+variable frequency speed control+pneumatic control. The synchronous performance deviation of the equipment from startup, normal operation, slow shutdown, emergency stop and other states shall not exceed 3% to ensure stable stranding. The electric control system is advanced, easy to operate and reliable     Input wire diameter Ø0.4－1.0mm(8 wire/ bobbins) Max stranding OD Ø60mm Max rotation speed of cage 80r/min Stranding cage motor power 55KW(AC) Stranding pitch(set one PLC) 80-600mm (Stepless adjustable) Linear speed 40m/min max Haul-off motor power 18.5KW（AC） Rotation speed of 600 concentric type taping machine 750r/min Motor power of 600 concentrictype taping machine 7.5KW（SERVO） Pitch of 600 concentrictype taping machine 0-200mm (Stepless adjustable) Pay-off bobbin size in cage PND630 Main Caterpillar Max pulling force 2500kg Central pay-off bobbin size PN1600-PN2800(Customer provide drawing) Take-up bobbin size PN1600-PN3000(Customer provide drawing) Machine center high 1000mm  

1250/1+4 laying-up machine delivery to Vietnam   Tehcnical sheet input line dia. Φ6-Φ30 mm Strand cage max rotation speed 50r/min Max lay-up diameter Φ80mm Lay-up pitch 400-2500mm (stepless adjustable) Non-metallic wrapping head 600r/min Pitch of Non-metallic wrapping head 0-250mm (stepless adjustable) Linear max speed 50m/min Haul-off Max pull force 1600kg Pay-off reel size in cage PN1250 Central Pay-off reel size PN1250 Take-up reel size PN1250- PN2500 Main Cage motor power 45 kW (AC inverter motor) Motor power of Non-metallic wrapping head 11 kW (AC inverter motor) Motor power of Metallic wrapping head 18.5 kW (AC inverter motor) Take-up motor power 5.5 kW (AC inverter motor) Capstan motor power 22 kW(AC inverter motor) Machine high 1000mm  

The company participated in the China Cable Exhibition in 2019. The exhibition area is 120 square millimeters. It receives 500 transferees and 30 international customers. In this exhibition, the company brought the latest design of independent motor frame winch, which uses separate motor to control the winch cage independently. And accept CCTV China's most influential brand evaluation activities, and achieved excellent results.  

Rigid stranding machine JLK630/1+6+12 (Separate motor driving and automatic loading system) Technical sheet Application: This machine is mainly used to produce large section and large length steel cored aluminum strand and aluminum alloy wire; It can also be used for pressing of copper round and aluminum sector conductor.   Overview of equipment composition The whole machine is driven by separate motors driving. Each section of the cage and capstan is driven by a independent motor,. The control of the whole machine adopts Siemens S7-200 series PLC to ensure synchronization accuracy. In actual production, the operator can set the process parameters such as the pitch of each section of the stranding cage and the speed of the production line on the touch screen according to the cable specifications to be produced, and automatically calculate the speed of each transmission part and control the pay-off tension through PLC when starting up.     2.Main Parameter: 2.1 Input wire diameter Copper Ø 1.5－Ø 5.0mm Aluminum Ø 1.8－Ø 5.0mm 2.2 Max stranding OD Ø 25mm 2.3 Max rotation speed 6 bobbins 230r/min( 12bobbins 198r/min( 2.4 Stranding cage motor power 6 bobbins 75KW(AC) 12 bobbins 75KW(AC) 2.5 Stranding pitch(set one PLC) Stepless adjustable 2.6 Traction line speed Max 61m/min 2.7 Capstan motor power 55KW（AC） 2.8 Pay-off bobbin size in cage PND630 2.9 Forceful dual wheel capstan Ø 1600mm 2.10 Central pay-off bobbin size PND500-PN630 2.11 Take-up bobbin reel size PN800-PN1600 2.12 Machine center high 1000mm