ф500 2mm Square Copper Wire Bunching Machine

Ф500 High Speed Wire Bunching Machine For Copper Wire 2mm Square

1. Suitable range

Fully automatic double twisting machine, mainly used for stranding of multiple strands of copper wire, and changing the pitch to a pair of gears.

2. Main Standard
   1. Vertical pay-off 66 sets (The maximum number of copper wire in your company is 64, and the other pay-off is ready to use.)
   2. Maximum size of the reel (diameter × total length) (mm): φ500 × 314 (general 400 type reel)
   3. The largest section of stranded copper wire: 1.5mm2;
   4. Stranded copper wire diameter range (mm): 0.08 - 0.32
   5. Pitch range (mm): 5.34 - 40.02
   6. Stranding direction: "S" to or "Z"
   7. Twist bow speed (r/min): 0 - 3000, stepless adjustable
   8. Height of the spindle from the ground (mm): 710mm
   9. Machine dimensions (length × width × height) (mm): 2560 × 1350 × 1400
   10. Machine net weight (kg): 2000
   11. Power: 380V, 50Hz
   12. Machine installation location Altitude: ≤1000m
   13. Machine installation location Ambient temperature: ≤40°C
   14. Incoming direction: the right end of the machine enters the line
   15. Noise: ≤85db
3. Operating system and electrical configuration

1. Motor: 7.5HP (5.5KW) (Siemens motor) + 7.5HP (5.5KW) frequency conversion adjustment (Yaskawa inverter)
2. Take-up tension: manual mechanical friction tension
3. Meter: electronic meter, with the drive wheel driven by the line, the display shows that the meter automatically stops down
4. Rope up and down mechanism: manual - hydraulic
5. Electrical control device: imported switch button accessories
6. Cable arrangement: polished rod cable, adjustable width and row spacing
7. Brake: electromagnetic brake (with internal and external brakes)

4. Mechanical composition performance analysis and standard parts

1. Box structure: Material: Q235; The box body is formed by iron plate welding surface, after annealing, eliminating internal stress and then passing through precision boring machine, integrated boring
2. Spindle: 40Cr; the shaft is quenched and tempered HB250 to ensure the elimination of internal stress, improve the spindle strength, high-frequency treatment of the bearing mounting surface, improve the resistance to tampering, etc.
3. Winning bow material: spring steel strip;
4. Wire piece on the skein: porcelain eye;
5. Main engine bearing: mainly used in Japan NSK
6.