Individual Motor Driven Jlk630/12+18+24 Rigid Frame Strander
1.Application:
The machine is mainly used for stranding & compacting copper and aluminum sector conducting, stranding & drawing & compacting round conductor and pre-twisting&compacting for miliken conductor
2. Main technical data:
2.1 Diameter of single wire :Cu Φ1.8～Φ4.6mm, Al Φ2.0～Φ5.0mm
2.2 Cross section after stranded Φ45mm
2.3 Stranding pitch step-less adjustable
12B 46~603mm
18B 51~672mm
24B 60~799mm
2.4 Max. rev of cages:Al wire( 240kg) copper wire( 600kg)
12B 230r/min 190r/min
18B 190r/min 170r/min
24B 170r/min 150r/min
2.5 Pre-spiraling and compacting pitch 319~1804mm( step-less)
2.6 Max.rev of taping head 500r/min
2.7 Taping pitch step-less adjustable
2.8 Line speed of hauling-off max. 40m/min
2.9 Capstan wheel dia. Φ2000mm
2.10 Pay-off bobbin in the frame PND630
2.11 Central pay-off bobbin PN800~PN1600
2.12 Take-up bobbin PN1250~PN2500
2.13 12B cage motor 75KW(ACVF)
2.14 18B cage motor 75KW(ACVF)
2.15 24B cage motor 90KW(ACVF)
2.16 Pre-twisting and compacting motor 1.5KW(ACVF)
2.17 Taping motor 11kW(ACVF)
2.18 Capstan motor 110KW(ACVF)
2.19 Central height of machine 1000mm
3. Main parts of equipment:
3.1 Φ1600 shaft-less type pay off 1 set
3.2 Wire guiding stand 1 set
3.3 12B,18B, 24B cage 1 set each
3.4 Side bottom loading device 3 sets
3.5 Pre-twisting and compacting unit 3 sets
3.6 Horizontal Meter counter 1 set
3.7 Φ2000 Dual wheel capstan 1 set
3.8 Φ600 dual pad taping unit 1 sets
3.9 Φ2500 Portal type take-up 1 set
3.10 Electrical control system 1 set
3.11 Safety fence 3 sets
4.3.5 The frame structure is supported by bearings on both ends. Each cage is driven by a separate motor, which rotates the rotating body via a timing belt with a soundproof cotton cover, with low speed electrical jogging positioning for loading and unloading bobbins.
4.3.6 The bobbins are clamped pneumatically with mechanical lockup function.
4.3.7 Split pad device for each section of cage.
4.3.8 The single wire pay-off tension is controlled pneumatically through imported proportion valve, which makes tension stable from full to empty bobbin.
4.3.9 Each bobbin has the electronic wire break detecting unit. The HMI could show which cage has wire break fault for operator’ solving problems.
4.3.10 Pneumatic brake.
4.3.11 Each cage wire crossing die with tungsten steel die.
4.3.12 Each cage is equipped with a side bottom loading unit.
4.3.13 Each cage is equipped with a set of safety fence, Flip-flop construction, motorised opening and stop-open function.
| Bearing brand |
(Harbin, Luoyang, Wafangdian.) |
| Low voltage appliance brand |
(Schneider or China brand) |
| Brand of pneumatic component |
(AIRTAC) |
| Brand of main drive motor |
(SIEMENS) |
| Frequency conversion controller |
(INOVANCE) |
| Touch screen |
(SIEMENS) |
| PLC |
(SIEMENS) |
