Rigid Stranding Machine 630/6+12+24 For Wire Production With Manual Loading Bobbin System

Rigid Stranding Machine 630/6+12+24 for Wire Production with Manual Loading Bobbin System

1. Application: This machine is mainly used to produce large section and large length steel cored aluminum strand and aluminum alloy wire; It can also be used for pressing of copper round and aluminum sector conductor.

2.Main technical parameter

• Input wire diameter:Copper Ø 1.5－Ø 5.0mm,Aluminum Ø 1.8－Ø 5.0mm
• Max stranding OD:Ø35mm
• Max rotation speed:
• 6 bobbins 229r/min(
• 12 bobbins 197r/min
• 27 bobbins 178r/min
• Stranding cage motor power:
• 6 bobbins 75KW(AC)
• 12 bobbins 75KW(AC)
• 24 bobbins 75KW(AC)
• Stranding pitch(set one PLC):Stepless adjustable
• Traction line speed:Max 60m/min
• Capstan motor power:90KW(AC)
• Pay-off bobbin size in cage:PND630
• Forceful dual wheel capstan:Ø 2000mm
• Central end shaft pay-off bobbin size:PN800-PN1600
• Take-up bobbin reel size:PN1250-PN2500
• Machine center high:1000mm

3. Main components:

• Ø1600mm Center Pay-off stand
• Guide wire stand
• 6.12.24 bobbins stranding cage
• Closing wire die holder
• Pre-spiraling Rotating Compacted stand(Milliken)
• Mechanic and electronic Meter counter
• Ø 2000mm Powerful double wheel capstan
• Ø2500mm portal type take-up with traverse stand
• Electric control cabinet
• Electrical control Safety protection fence and cover

4. Electric control system:

• The power supply: three-phase, five wire system: 380V (± 10%) 50Hz, total 350KW
• The machine adopts separate motor drive (the motor adopts variable-frequency motor), each AC variable-frequency motor adopts frequency converter to control speed regulation, the whole machine control is managed by programmable controller, the touch screen controls operation, and the host is started after the alarm bell rings.
• Frequency converter fault alarm.
• Overload protection and power supply protection of winding and arranging lines.
• Air press lack protection.
• Break wire protection
• Equipped with Ethernet interface for data uploading.
• Programmable controller (PLC) can be connected to Ethernet to view fault information, or remotely view and update the operating system

5. Safety protection device

• Main cage: wall type safety protection net
• Coupling, transmission and other parts: sheet metal protective cover

6.Operating information:

Right head machine, facing device operation, left release wire, right take-up wire, or customized

7. Main brand: